STAYVE Hyaluronic Acid Ampoule

Description

Hyaluronic Acid Ampoule contains Sodium Hyaluronate, which is the main ingredient to fill the skin tissues with moisture thoroughly and helps to improve and retain that moisturizing power.

MTS stands for Microneedle Therapy System and is a therapy also known as Micro-Needling.

MTS (micro-needling) pokes fine holes in the skin and creates collagen formation in the healing process of the fine holes that were just created. This procedure helps increase skin elasticity. The active ingredients of the ampoule will penetrate deep into the skin through the fine pores on the skin’s surface, increasing absorption efficiency.

When applied by hand, ampoule stays on the skin’s surface and does not penetrate deeply.

When treated with MTS (micro-needling), it penetrates into the skin and increases the absorption rate.

Stayve Hyaluronic Acid Ampoule contains triple Hyaluronic Acid and triple Peptide which replenish moisture and enhance the skin’s elasticity. It contains three types of Hyaluronic Acid that enhance skin’s absorption and applicability, hydrating dry skin. Low molecular peptides penetrate the dermal layer of the skin to help relieve wrinkles and strengthen elasticity.

Combination of a Hyaluronic Acid, which pulls the hydration, and a Peptide, which refer to as an applicable botox.

Triple Hyaluronic Acid completely replenishes moisture from the inside out.

Hyaluronic Acid is known as a material with an excellent skin moisturizing ability because it has the ability to attract moisture over 1000 times its own weight with its spiral structure.

• Ingredient :

Water, Sodium Hyaluronate, Hydrolyzed Hyaluronic Acid, Sodium Acetylated Hyaluronate, Dipropylene Glycol, 1.2-Hexanediol, Butylene Glycol, Propylene Glycol, Glycerin, Glyceryl Acrylate/Acrylate Acid Copolymer, Arginine, Carbomer, HydroxyethylCellulose, Betaine, Allantoin, Tremella Fuciformis (Mashroom) Extract, Ethylhexylglycerin, Disodium EDTA, Acetyl Hexapeptide-8, Copper Tripeptide-1,…

Expiration

– expiration stated on the box

– once opened use within 2 weeks and store in the fridge

Country of origin: Stayve product made in Korea

• INGREDIENTS STORY
  

– Hydrolyzed Hyaluronic Acid

Hydrolyzed Hyaluronic Acid has a molecular weight of 3000 to 10000 Daltons. It penetrates not only the skin’s surface, but also the stratum corneum into the skin, providing both excellent moisture retention and moisturizing power. Compared to Hyaluronic Acid, which only stays on the skin’s surface, Hydrolyzed Hyaluronic Acid penetrates into the skin and does not wash away, but maintain hydration.

– Sodium Hyaluronate

Sodium Hyaluronate attracts 1000 times more moisture that its own weight on the skin’s surface and forms a moisture barrier to prevent moisture evaporation. It  is a natural moisturizing ingredient that is harmless to the human body.

– Sodium Acetylated Hyaluronate

Sodium Acetylated Hyaluronate contains Acetyl and it has properties for hydrophile. It acts as an anchor that attaches well to the skin, increasing adhesion to the skin. Furthermore, it increases moisturizing synergy when used Hydrolyzed Hyaluronic Acid and Sodium Hyaluronate combined together.

– Acetyl Hexapeptide-8

Acetyl Hexapeptide-8 is a synthetic material consisting of Hexapeptide’s acetylation, which functions similar to Botulinum toxin type A, and is also known as “applicable botox”. Botox destroys the SNARE Complex (a protein complex that helps the fusion of cell membranes), making it difficult to induce muscle contraction. On the otherhand, Acetyl Hexapeptide-8 has the effect of slowing wrinkle production and increasing the skin’s elasticity by reducing the formation of SNARE complex to relieve muscles. It is absorbed into the skin well and remains stably since it is a small and low molecular peptide.

– Copper Tripeptide-1

Copper Tripeptide-1 is a small molecule that can move easily between the tissues and cells and affects the synthesis of collagen 3 distributed in the dermis layer of Collagen type. It increases the biosynthesis of Collagen and Elastin, improves the skin’s elasticity, and induces fundamental wrinkle improvement and anti-aging. It also prevents aging the removing and regenerating damaged cells, promoting the skin cells’ cycle of regeneration.

– Palmitoyl Pentapeptide-4

Palmitoyl Pentapeptide-4 stimulates the synthesis of collagen and glycominoglycan, inducing collagen type I biosynthesis which increases the skin cell activity and helps to prevent rough skin and wrinkles. It restores skin damaged by external irritants including UV and has an excellent moisturizing effect with a good moisture affinity.

– Gold

Gold has been known as an excellent beauty ingredient for purifying the skin and improving skin tone since ancient times. There is a record that Cleopatra, who knew this, used gold directly on her skin to beautify it.

• Treatment methods:
  – Use the Hyaluronic Acid Ampoule during MTS (micro needling) procedure.
  – Use before a BB Glow treatment to boost overall result of the treatment.

• Expiration
  – 2 years before opening
  – Use within 2 weeks after opening
  – Secure lid and store in refrigerator after opening

• How To Use Korean BB Glow Treatment

Step 1: Remove all makeup and cleanse the face thoroughly.

Step 2: Lightly apply toner on the face with a cotton pad.

Step 3: Using a brush, apply a thick layer of the exfoliating gel. The MTS (Micro-needle Therapy System) treatment will be more effective after exfoliating. It is not recommended to use any other exfoliating gel besides the one included in the MTS treatment.

– Dry skin: 2 minutes

– Normal skin: 3 minutes

– Oily skin: 5 minutes

The exfoliating gel’s acidity may cause slight tingling on sensitive skin.

Step 4: Wash face or wipe with a damp towel.

Step 5: Apply the neutralizing foam. This foam lowers acidity caused by the exfoliating gel. Use hands to gently massage the face for 3 minutes. Wash face or wipe with a damp towel.

Step 6: Begin the MTS treatment (2-3 minutes) after applying the booster ampoule. The booster ampoule comes in various types to meet your skin’s needs: acne, salmon, peptide, lifting, whitening, and aqua. Regular BB ampoules can be applied instead of the booster, but the booster ampoule is more effective when used before a BB Glow treatment.

Step 7: Begin the MTS treatment (2-3 minutes) after applying the BB Glow ampoule.

Step 8: Apply a mask pack or modeling pack to reduce irritation. You can also use the Omega Light machine for 10 – 15 minutes. This step can be skipped if you don’t have the machine.

Step 9: After removing the mask, cleanse the face with a damp sponge and apply Stayve Repair Cream

Step 10: For aftercare, use Satyve Repair Cream every day after cleansing. It is also recommended to apply booster ampoules at home to provide nutrients and maximize effectiveness.

———————
After countless sleepless nights, refining ideas, remodeling the facility, and designing class content, Master Ann Nguyen has finally made her dream come true with The Aura Beauty Academy, specializing in the art of Permanent Makeup and Microblading. We, The Aura Beauty Academy ensures that anyone who participates in the course will leave feeling confident in their future as a professional artist.

THE AURA BEAUTY ACADEMY is a beauty company that provides microblading, permanent cosmetic make-up, and provides licensing approved training in Westminster – Orange County California.

🏢 Address: 14550 MAGNOLIA ST, SUITE 206, WESTMINSTER, CA 92683

☎ Hotline: (714) 989-6268 / 833-THEAURA (833-843-2872)

📧Email: [email protected]

🌐Instagram: @aurabeautycompany